• Transfer tape

    July 20, 2005
    Transfer tape Lamart Corporation Clifton NJ USA Transfer tape 1101-60 is a 2 mil high performance transfer tape for mounting name plates and bonding relatively smooth surfaces. It exhibits a minimum 180° peel. It also provides good shear…

  • Varnish

    July 20, 2005
    Varnish Rad-Cure Fairfield NJ USA Rad-Kote 708HSLV is a UV curable, high gloss overprint varnish for flexo, roll coater and blanket coater application. It offers good adhesion to paper and most plastics and is hot stamp-able. The varnish is…

  • Ink for films

    July 20, 2005
    Ink for films Flint Ink Ann Arbor MI USA Arrowbond Ultra ink is a laminating ink system for flexographic and gravure printing. It offers high bond value and low retained solvents. The chemistry makes it suitable for many different films and applic…

  • Ink for films

    July 20, 2005
    Ink for films Flint InkInk Ann Arbor MI USA Arrowbond Ultra ink is a laminating ink system for flexographic and gravure printing. It offers high bond value and low retained solvents. The chemistry makes it suitable for many different films and app…

  • Holographic

    July 20, 2005
    Holographic shrink bands Seal-It Farmingdale NY USA Holographic shrink bands and labels are designed to provide manufacturers of consumer products with a visible security device. The holographic strip is a three dimensional image and can be…

  • Calorimeter

    July 20, 2005
    Calorimeter UV Process Supply Chicago IL USA Con-Trol-Cure’s TFC-9000 is a thin film calorimeter that can test inks, coatings and adhesives to ensure consistent curing. It rapidly measures the exothermic heat reaction from a polymerizi…

  • Metallic ink

    July 20, 2005
    Metallic ink troubleshooting FRM Group Los Angeles CA USA A free UV metallic inks troubleshooting guide is available for printers and converters. The guide includes an e-mailed booklet and a poster. 323-769-4880 fax 877-386-1499…

  • Printers with RFID modules

    July 20, 2005
    Printers with RFID modules SATO International Singapore The company announced that three printers will be fitted with RFID modules: CL408e, CL412e, and the print-and-apply print engine, M-8485 Se. The new printers can write data onto RFID tags in…

  • Digital press

    July 20, 2005
    Digital press Newfoil Machines Oldham Lancs England Newfoil 3500 is a digital press featuring VIP Color VP8020 Cool Fusion digital print engines, coupled with flat bed converting and finishing equipment. 44-0-161-627-0550 fax 44-0-161-627-055…

  • Diecutting

    July 20, 2005
    Diecutting Bunting Magnetics Newton KS USA X-treme series magnetic diecutting cylinders are machined from solid metal to resist deflection, and ground to close tolerances. The cylinders allow on-press die mounting and feature standard cylinder scr…

  • Sensor

    July 20, 2005
    Sensor AccuWeb Madison WI USA The AccuBeam II digital color line guide sensor utilizes a combination of optoelectronic technologies to recognize and guide solid and intermittent color lines, edges and print patterns throughout the entire col…

  • RFID applicator

    July 20, 2005
    RFID applicator Logotech Machines/Tadbik Fairfield NJ/Petach-Tikva, Israel The TAD-RF series is a line of automatic label application machines featuring in-line RFID label verification systems. The machines employ an in-line testing unit that dire…

  • Shaft

    July 20, 2005
    Shaft Goldenrod Corporation Beacon Falls CT USA The 1260-LF Ultralight Aluminum Multiple Bladder 3" Leaf Shaft was developed under critical ergonomic guidelines and at less than .24 lbs per inch of assembled body. The bladders are easil…

  • Plate processor

    July 20, 2005
    Plate processor Anderson & Vreeland Bryan OH USA The Orbital X is a design stack-style processor of water-water photopolymer plates (polyester or metal-backed plates) that allows flexographers to customize the unit. It is an all-in-one system…

  • Trim removal

    July 20, 2005
    Trim removal Precision AirConvey Newark DE USA The Trimpac trim removal system cuts and evacuates trim and waste at speeds exceeding 5,500 fpm to permit converters to operate at the high speeds made possible by the latest slitting technology…