Breaking News

DLFS introduces 'mini' label finishing system

July 16, 2013

The 8.5 inch wide MP850 can laminate and diecut pre-printed labels, produced by any roll-to-roll label printer.

DLFS (Digital Label Finishing Systems), has introduced the MP850 label finishing system, what the Woodtsock, GA-based company describes as an 8.5” wide “Mini Press” designed to laminate, diecut, slit and rewind digitally printed labels.

The MP850 is a label finishing system that can laminate and rotary diecut  pre-printed labels, produced by any roll-to-roll label printer. The MP850 diecuts labels up to 8.25" wide x 9" long at speeds up to 15 IPS (Inches per second). The system features an all-electronic setup with an interactive touch screen display. Its intelligent rotary diecutter cuts precisely, adjusts automatically and reduces label waste. The MP850 can also be used to cut blanks, to laminate specialty materials or to slit and rewind stock.

The MP850 uses either engraves tooling or an optional magnetic cylinder with flexible dies. The MP850 was also designed to accept most flexo tooling (up to 7.5” wide), and for ease of operation and rapid changeover. The MP850 has many features of full size presses such as X and Y adjusters on the cutter and slitter, step up and step down anvil rollers, primary and secondary finished label take-ups and comes standard with a laminate liner take up.


 
  • HP previews Dscoop

    HP previews Dscoop

    Greg Hrinya, Associate Editor||February 10, 2017
    Ken Brown detailed the event, which will take place in Phoenix, AZ, USA, from March 1-4.

  • Xeikon Café returns in March

    Xeikon Café returns in March

    February 10, 2017
    Members of all areas of the label and packaging industry are invited to Xeikon headquarters in Lier, Belgium, March 28-31.

  • RotoMetrics tackles rotary diecutting challenges

    RotoMetrics tackles rotary diecutting challenges

    Greg Hrinya, Associate Editor||February 7, 2017
    Customers are seeking higher quality with shorter lead times.

  • Getting Educated at Labelexpo

    Getting Educated at Labelexpo

    Steve Katz, Editor||September 7, 2016
    With a wide range of presentations, expert-led master classes and machinery demonstrations, there is no shortage of learning

  • Drupa 2016 a ‘resounding success’

    Drupa 2016 a ‘resounding success’

    Steve Katz, Editor||July 15, 2016
    The label industry was well-represented as visitors showed strong interest in the latest printing technologies.

  • Label & Narrow Web Job Market Report

    Label & Narrow Web Job Market Report

    Dan Miller||July 15, 2016
    A look at the trends and challenges affecting the label industry’s talent search.