All Euroflex casing presses are based on a central impression drum design. Utilizing single or twin drums and flexo printing, the presses can be specified for use with different types of ink; UV cationic and solvent based inks for printing on single and multi-layered polyamides, or water and alcohol based inks for use on collagen and fibrous casings. The packaging applications for artificial casings continues to grow, with pet foods, fruit purees, smoked and fish being added to all types of meat products, including a huge range of sausages.
“Top print quality and reliability are key to the Euroflex philosophy, with many presses operating 24/7 requiring the Martin Automatic systems to perform at the same high production levels,” advises Jo Andersen, Marketing Director at KPG Europe.
Euroflex dual-pass presses provide exceptional value, with up to eight print units on a single temperature controlled CID. Printing on both sides of the web, press capability can also include varnishing and inline coating, and units for flood coating white.
The semi-automatic versions are fitted with two accumulators, two unwinds and two rewinds. At roll change, the press slows to 25m/min to allow the operator 45 seconds to effect the change before ramping back up to full production speed. The fully automatic versions incorporate systems from Martin Automatic. KPG fits a Martin STS butt splicer with web festoon, and STR turret rewinder to provide non-stop production. Both systems are fitted on a rail system for lateral alignment of the web, with the STR also having an ultrasonic web guide.
A key consideration here is that the web enters and leaves the press off-centre by varying degrees according to the width of the material. Martin designed this rail system so that operators are able to make rapid adjustments to re-align the web, thereby reducing waste and maintaining product integrity. The Martin rail system works well with KPG dual-pass technology because the web is located centrally on the STS mandrel while it is being positioned for its first pass round the CID. KPG also has a number of combined STS/STR installations on twin-drum single pass casing presses in Eastern Europe and Russia.
Many KPG customers with wider web presses, wanting to use their press for single pass printing, choose to fit only a Martin STS unit. In this case, the press is fitted with integral unwind and two rewinds and is a fine example of how the combined technology of Martin Automatic and KPG works to benefit the customer by providing production flexibility.
Casings are printed flat, although the web is actually an extruded tube without a join, and are therefore high value substrates where any waste is a costly factor. Avoiding pinholes is critical, so constant web tension is vital and a secure airtight splice essential. On the splice, tape has to be applied to the top and under side of the web to ensure 100% air tightness. After printing, the web is shirred and then product filled under pressure and in case of meat products, finally subjected to autoclaving. So, even the smallest perforation will fail the roll.
KPG views emerging markets for artificial casings as having a major influence on sales. As global population continues to grow and greater affluence brings more brand awareness, the demand for this specialist printed packaging and products with longer shelf life increases. A constant supply of good quality casings from local and reliable extrusion plants is another ‘must’. Europe is well supplied, according to KPG, with leading European extruders also having production facilities in Asia, and North & South America. Additionally, there is growing trend for many KPG customers located around the world to be both extruders and casing printers.
An overall assessment would be that the working partnership between Martin Automatic and KPG is founded on trust and a clear understanding of each one’s capabilities and the other’s specific requirements. Speaking for Martin Automatic, Vice President of Sales & Marketing Gavin Rittmeyer explains: “Both companies have a high degree of expertise in their own fields of operation. KPG’s customers supply markets where 100% consistent quality is the norm, and all elements of the technology chain have to meet or exceed the standards set. Only by working closely together can two machine manufacturers hope to achieve what the industry demands, and I am delighted that we have reached that situation with KPG.”
The relationship between KPG and Martin Automatic is not limited only to the artificial casings market. KPG also markets a range of specialist presses for the tube forming industry, providing high quality printed ABL/PBL tube laminates. Using flexo, letterpress, or combined printing processes, these presses are also frequently operated on a non-stop production schedule that requires Martin Automatic technology. The MBS butt splicer and LRD rewinder are ideal for the heavier rolls of tube laminates even at high press speeds. These combined KPG/Martin presses are used by international companies supplying printed tubes to the toiletry, cosmetic, pharmaceutical, and home care industries.