In various tests, the adhesive bond proved to be resistant against UV radiation and chemicals, as well as during fluctuations in temperature and humidity. The PET material withstood UV radiation of more than 5,000 hours in accordance with DIN EN ISO 4892-3, as well as temperature ranges from -40°C to 160°C without any problems.
Furthermore, various weathering tests to simulate permanent fluctuations in temperature and humidity were successfully passed. As a result, the material is predestined for all permanent outdoor markings. In addition to subsequent thermal transfer printing, it can also be used in all conventional printing processes. The thermal transfer ribbons Ricoh B110CU and 3M 92904 display highest degrees of resistance against ethanol, fuel, diesel, brake liquid, motor oil and acetone. Perfectly suitable for demanding logistics solutions, the PET material is well-suited for permanent special labels in combination with the aggressive UV acrylate adhesive HM716UV and with adhesive application weights ranging from 19 to 35g/sqm. Areas of application include challenging solutions for type plates, electronic components and logistics solutions, for example labeling pallet cages and stockyards. Its resistance against UV radiation, chemicals, temperature and humidity, the acrylate adhesive also features high adhesive power. It is significantly higher than that of conventional UV acrylate adhesives for initial adhesion and final adhesive power (FTM1 after 24 hours on glass at 25g coating weight > 28N/25mm).
The new adhesive bond is available at VPF in Sprockhövel immediately under the designation 70739 (special PET foil white matte 55my Dura TC) / HM716UV). The minimum order quantity is only 500 sqm (with 32g coating weight and white glassine B800-473, 80g, siliconized on both sides). The material is also available in silver matte or glossy white upon request. A minimum order quantity of 2,500 sqm² applies for all custom solutions with individual adhesive application weights or liners.