04.04.19
Heukäufer Folien GmbH, based in Herten, Germany, has turned to web guiding systems from BST eltromat International for its quality assurance. The web center-line guidings, with two ultrasonic sensors each, guide the webs accurately through the machines for the manufacturer of sophisticated foil bags and carrier bags.
“Thanks to their high quality requirements, Heukäufer Folien, provider of flexible packaging solutions, was the ideal partner to test our FVG POS 100 sensor positioner and ekr 500 digital Unit Touch controller in practical use,” says Kai Prahl, area sales manager at BST eltromat, looking back on autumn 2017. At that time, the company Heukäufer Folien was asked to conduct a beta test of the brand new technology. “The web guiding system on our mono-extruder had seen better days, so the inquiry came at just the right time,” says managing director of Heukäufer Folien, Kurt Barth.
At the turn of the year, the company began using the US 2010-type sensor positioner, equipped with two ultrasonic sensors, and the controller.
“To be on the safe side, we initially left the old technology in the mono-extruder. BST eltromat installed a switch for us, so that we could activate the old web guiding system again at any time,” says Peter Schubert, technical director at Heukäufer Folien.
After all, the 24-hour operation of this extruder with a comparatively high ambient temperature was seen as the ultimate test for the new technology. The switch was not needed. Both the FVG POS 100, developed specially for wide webs, and the ekr 500 digital Unit Touch functioned flawlessly from the very beginning.
“When changing web widths, the sensor positioner automatically moves the sensors to the web edge and positions the webs according to the measurement results provided by the sensors,” says Schubert. “This ensures that the webs are fed centrally through the extruder.”
The intuitive color LC touch display of the ekr 500 digital Unit Touch, with the innovative ekr commander, shows the web position, the sensor covers and the position of the actuator with easily readable graphics and symbols. Schubert attests to “considerably increased user-friendliness” in the intuitive menu navigation of the controller. The startup also ran smoothly. “We assembled the components of the new web guiding according to the plug & play principle. The components then automatically recognized one another.”
Whether it’s in the fruit, vegetables, frozen foods, animal feed or gardening sector, customer demands for high-quality, functional and environmentally friendly flexible packaging are rising constantly. Up to 100% recyclable raw materials, smaller bag formats and thinner foils – Heukäufer Folien is exploiting every technical possibility to reduce the use of materials in its packaging production. Thanks to web guiding systems from BST eltromat, quality assurance has continually grown in importance amidst the sometimes competing demands of quality, functionality, economy and sustainability.
“In extrusion, the rolls have to be wound neatly – an important condition for high quality in flexo printing,” says Barth. The printing machines are equipped with swivel roller guides after rewinding and pivoting frames before printing. Both web guiding systems enable off-center operation, which prevents the rollers from being worn down. In addition, older Premius web monitoring systems from BST eltromat are installed in the flexo printing machines to inspect static printing defects.
“Thanks to their high quality requirements, Heukäufer Folien, provider of flexible packaging solutions, was the ideal partner to test our FVG POS 100 sensor positioner and ekr 500 digital Unit Touch controller in practical use,” says Kai Prahl, area sales manager at BST eltromat, looking back on autumn 2017. At that time, the company Heukäufer Folien was asked to conduct a beta test of the brand new technology. “The web guiding system on our mono-extruder had seen better days, so the inquiry came at just the right time,” says managing director of Heukäufer Folien, Kurt Barth.
At the turn of the year, the company began using the US 2010-type sensor positioner, equipped with two ultrasonic sensors, and the controller.
“To be on the safe side, we initially left the old technology in the mono-extruder. BST eltromat installed a switch for us, so that we could activate the old web guiding system again at any time,” says Peter Schubert, technical director at Heukäufer Folien.
After all, the 24-hour operation of this extruder with a comparatively high ambient temperature was seen as the ultimate test for the new technology. The switch was not needed. Both the FVG POS 100, developed specially for wide webs, and the ekr 500 digital Unit Touch functioned flawlessly from the very beginning.
“When changing web widths, the sensor positioner automatically moves the sensors to the web edge and positions the webs according to the measurement results provided by the sensors,” says Schubert. “This ensures that the webs are fed centrally through the extruder.”
The intuitive color LC touch display of the ekr 500 digital Unit Touch, with the innovative ekr commander, shows the web position, the sensor covers and the position of the actuator with easily readable graphics and symbols. Schubert attests to “considerably increased user-friendliness” in the intuitive menu navigation of the controller. The startup also ran smoothly. “We assembled the components of the new web guiding according to the plug & play principle. The components then automatically recognized one another.”
Whether it’s in the fruit, vegetables, frozen foods, animal feed or gardening sector, customer demands for high-quality, functional and environmentally friendly flexible packaging are rising constantly. Up to 100% recyclable raw materials, smaller bag formats and thinner foils – Heukäufer Folien is exploiting every technical possibility to reduce the use of materials in its packaging production. Thanks to web guiding systems from BST eltromat, quality assurance has continually grown in importance amidst the sometimes competing demands of quality, functionality, economy and sustainability.
“In extrusion, the rolls have to be wound neatly – an important condition for high quality in flexo printing,” says Barth. The printing machines are equipped with swivel roller guides after rewinding and pivoting frames before printing. Both web guiding systems enable off-center operation, which prevents the rollers from being worn down. In addition, older Premius web monitoring systems from BST eltromat are installed in the flexo printing machines to inspect static printing defects.