09.23.19
UEI Group is showcasing the NW SpeedChase NXT system at Labelexpo Europe. This new system is designed to change the way engraved hot stamping and embossing flat dies and counter forces are set up on a flat-bed narrow web press.
The NW SpeedChase NXT system provides easier lock-up, quicker changeover, lower overall costs, increased speeds, and improved overall efficiency. It includes an NW SpeedChase NXT and a NW SpeedPlaten NXT, which use a NW UniLock-Up Plate Ejector NXT box to quickly set up and change jobs.
Todd Rima, vice president of operations and sales, says, “Lock-up is now reduced to one steel plate for the engraved dies and one for the counter forces. Job changeover can be accomplished, on average, in as little as one minute.”
Rima adds, “UEI pre-mounts and pre-affixes both the engraved dies and counter forces to UniLock-Up plates. So, you’re ready to go with a quick mount of the UniLock-Up Engraved Die and Counter Force Plates to the NW SpeedChase and NW SpeedPlaten. We designed the NW SpeedChase system to be easy-to-use and for it to work with your existing press. All engraved dies and counter forces arrive pre-mounted and pre-registered onto NW UniLock-Up plates, so, out of the box, they’re ready for the press. This also greatly reduces the make-ready time.”
The NW SpeedChase NXT system provides precise register of engraved dies and counter forces to the digital press file and setup, and changeover can be done “hot” or “cold."
The SpeedChase’s ergonomic design is lightweight and easy-to-handle, and it’s 65% lighter than a traditional chase. Special engineering allows individual engraved dies to be adjusted slightly (if necessary) in all directions. The NW UniLock-Up Die and/or Counter Force Plates can be stored easily, and UEI offers a cost-savings return/reuse program for the UniLock-Up Counter Force Plate NXT.
The NW SpeedChase NXT system provides easier lock-up, quicker changeover, lower overall costs, increased speeds, and improved overall efficiency. It includes an NW SpeedChase NXT and a NW SpeedPlaten NXT, which use a NW UniLock-Up Plate Ejector NXT box to quickly set up and change jobs.
Todd Rima, vice president of operations and sales, says, “Lock-up is now reduced to one steel plate for the engraved dies and one for the counter forces. Job changeover can be accomplished, on average, in as little as one minute.”
Rima adds, “UEI pre-mounts and pre-affixes both the engraved dies and counter forces to UniLock-Up plates. So, you’re ready to go with a quick mount of the UniLock-Up Engraved Die and Counter Force Plates to the NW SpeedChase and NW SpeedPlaten. We designed the NW SpeedChase system to be easy-to-use and for it to work with your existing press. All engraved dies and counter forces arrive pre-mounted and pre-registered onto NW UniLock-Up plates, so, out of the box, they’re ready for the press. This also greatly reduces the make-ready time.”
The NW SpeedChase NXT system provides precise register of engraved dies and counter forces to the digital press file and setup, and changeover can be done “hot” or “cold."
The SpeedChase’s ergonomic design is lightweight and easy-to-handle, and it’s 65% lighter than a traditional chase. Special engineering allows individual engraved dies to be adjusted slightly (if necessary) in all directions. The NW UniLock-Up Die and/or Counter Force Plates can be stored easily, and UEI offers a cost-savings return/reuse program for the UniLock-Up Counter Force Plate NXT.