09.24.19
Maxcess is showcasing its newest product lines at Labelexpo Europe. The four-day event is featuring the latest product offerings from Fife, Tidland, MAGPOWR, Webex and Componex.
“We are excited to be showcasing to our customers at Labelexpo our comprehensive product range covering all their web handling requirements, with winding, guiding, slitting, tension control and roller solutions to match their needs,” says Francesco Cristante, general manager of Maxcess Europe.
On Display at Labelexpo from Maxcess (Stand 6a45):
Fife - New line of Digital Sensors that incorporate LED readouts for web position, LED light sources and data from the sensor itself in a digital output format. VEO-700 next-generation inspection system featuring LED strobe lighting for longer life, a graphical user interface and programmable positioning.
Tidland - Control Series Electronic Knifeholder- an all-electronic knifeholder with a 360-degree blade guard to minimize operator interference and maximize the safety of your slitting operation.
MAGPOWR - DLCA-NET, a tension amplifier with networking capabilities, offers the ability to transmit calibrated tension values over communications such as EtherNet/IP, PROFINET, Modbus TCP and EtherCAT.
CSR and ISR tension sensing idler rolls, and thin load cells are on display, as well.
Componex - WINertia Dead Shaft Idlers maintain constant traction on high-speed webs and include built-in “air vents” that remove trapped air 7.5 times faster than any other idler roller on the market, says Maxcess.
“We are excited to be showcasing to our customers at Labelexpo our comprehensive product range covering all their web handling requirements, with winding, guiding, slitting, tension control and roller solutions to match their needs,” says Francesco Cristante, general manager of Maxcess Europe.
On Display at Labelexpo from Maxcess (Stand 6a45):
Fife - New line of Digital Sensors that incorporate LED readouts for web position, LED light sources and data from the sensor itself in a digital output format. VEO-700 next-generation inspection system featuring LED strobe lighting for longer life, a graphical user interface and programmable positioning.
Tidland - Control Series Electronic Knifeholder- an all-electronic knifeholder with a 360-degree blade guard to minimize operator interference and maximize the safety of your slitting operation.
MAGPOWR - DLCA-NET, a tension amplifier with networking capabilities, offers the ability to transmit calibrated tension values over communications such as EtherNet/IP, PROFINET, Modbus TCP and EtherCAT.
CSR and ISR tension sensing idler rolls, and thin load cells are on display, as well.
Componex - WINertia Dead Shaft Idlers maintain constant traction on high-speed webs and include built-in “air vents” that remove trapped air 7.5 times faster than any other idler roller on the market, says Maxcess.