Product Reviews

Label Applicators

March 15, 2010

Manufacturers of label application equipment provide brand owners – and converters – with machinery built for speed and efficiency.

Label Applicators

Manufacturers of label application equipment provide brand owners – and converters – with machinery built for speed and efficiency.

By Steve Katz

In each issue of L&NW, readers can find a wealth of information on the labeling industry. Featured stories cover everything from the latest marketplace trends to the most recent developments in label printing technology. Machinery and the advantages they offer converters is often a theme, as is coverage of the converting trends of the day.

A great deal takes place from the moment a brand and converter conceptualize a label to the time a consumer selects a product off the shelf. There are the marketing strategies the brand will employ on the label itself, the entire converting process, and the container that holds the product – the item the label will eventually adhere to. And the adherence of the label to the container is perhaps an overlooked step, but it is indeed an important one. A label’s value, and a product’s attractiveness, certainly decreases when a label is applied incorrectly. And both brand owners and converters would not be pleased if the hard work they put it into the job is for naught due to careless, ineffective and inefficient application.

The simplest applicator, and also the first, could be considered a pair of human hands. This machine can carefully and meticulously get the job done. Of course, questions about the practicality and efficiency of the human labeler arise. So, to meet the needs of the labeling community, manufacturers develop and market machinery designed for the specific task of label application. Below you’ll find information about a variety of product offerings from label applicator manufacturers.

Weber Marking Systems’s Tronics Series 3

Weber Marking Systems

Weber Marking Systems, Arlington Heights, IL, USA, is a manufacturer of applicators, and also a full-service label converter. Serving dual purposes to the label industry provides the company with a unique perspective on the applicator market.

Mike Soloway, labeling systems manager, says, “Since Weber is a major converter of pressure sensitive labels, we get a chance to see an extremely wide range of label application requirements throughout the industry. In fact, it’s that experience that has driven the creation of our line of label applicators. As a result, we provide PS label applicators that address both simple and complex labeling needs. For example, we offer a number of standard label applicators that can apply labels to the tops or bottoms of cases, packages or products as they are delivered to the systems via conveyor,” he says.

For more complex, higher-speed labeling, Weber’s Tronics Series 3 label applicator features the flexibility to be set up to label the front and/or back of products, tops and/or bottoms, plus, it can apply wrap-around labels. In addition, Weber also manufactures a selection of label printer-applicators, systems that combine both the printing of variable information on labels with the actual application. 

Soloway says the principal advantages the machinery provides the user is accurate label placement and improved productivity for virtually any labeling operation. “Our standard label applicators can fit into almost any packaging line that’s conveyor-fed. The labeling machinery is simply positioned through the use of an adjustable stand, or it can be mounted directly to the conveyor line itself,” he says.

The company’s high-speed Tronics systems can be integrated into an existing conveyor-fed arrangement, or its built-in conveyor can be used as a stand-alone labeling system. “This system also has the flexibility to address numerous labeling needs and label configurations,” says Soloway, adding, “The addition of any type of automatic label applicator will improve productivity, particularly if it replaces a formerly manual operation.”

Soloway points out that as PS labels continue to become more and more popular for all sorts of labeling, applicator technology has focused on higher and higher labeling speeds coupled with pinpoint accuracy. “In addition, companies are very interested in fully-integrated labeling systems that could include conveyors, bar code or RFID scanners, label verification equipment, plus associated software. Weber is able to provide virtually any component that might be required of a particular labeling operation,” he says.

There are challenges in the application stage of production that can arise – and it’s often due to how the products are handled. “One of the challenges we run across on a regular basis is inconsistent product handling, which makes it very difficult to provide accurate label placement. As a result, we try to overcome that challenge by recommending a label applicator system that includes a conveyor, rails and other handling equipment that can provide a consistently-positioned product for label application,” Soloway says. “Higher product throughput, sometimes with random-sized products to be labeled, is another consideration today. We address those instances by offering labeling systems with variable-stroke applicators and – again – customized product-handling solutions.”

Weber’s labeling equipment can handle a wide range of label sizes, shapes and constructions – including both paper and film label materials. The company also provides direct service and technical support to ensure its systems operate at peak efficiency.

LabelPack Automation

LabelPack Automation, headquartered in Bradford, PA, USA, manufactures a full line of label applicators, including semi-automatic and fully automatic machines for both pre-printed and thermal transfer labels. Jerry Dawson, sales engineer, says “the semi-automatic labelers are typically tabletop machines with which an operator loads each product one-at-a-time, while fully automatic labelers are typically inline with other packaging equipment, so no manual product handling is necessary.”

LabelPack Automation custom designed this applicator for labeling the top and bottom of clamshell cosmetic packages.
Like most label applicator manufacturers, LabelPack has a standard line of applicators for bottles and boxes, however, LabelPack offers custom-designed applications where an off-the-shelf labeler won't do the job. Some examples of custom labelers they've built have been for labeling beer kegs, car windows, makeup compacts, applying internal membranes to air bag deployment tubes, transferring labels onto new webs, bundling rods, and wrapping tapered products.

There are three reasons to use a machine to apply your labels, says Dawson, one being to get consistency of appearance of your labels on the store shelf. “If you want a professional product presentation, consistent label placement is essential; you need a machine.”

Labelers also reduce costs, he says. “A labeler is a one-time purchase that replaces ongoing labor expense for hand labeling. Also, your volume is so high that you have little choice in the matter. People can label only so fast – maybe 30 labels per minute for an hour or so, but a machine can apply well over 100 labels per minute, and do so indefinitely,” Dawson says.

A big challenge to today’s automatic labeling is the increasing variety of packages that run on a single line. “The best way for a company to minimize problems with this is to provide samples of every potential product to the labeler manufacturer. Because LabelPack emphasizes custom design, we start with the products and design the machine around them, while other manufacturers are more likely to start with a standard machine and modify it as necessary to accommodate additional products. Either way, the manufacturer needs product samples up front to work with,” he says.

Dawson points out that another challenge today is thinner-walled bottles that do not present a decent surface to apply a label. He says, “Companies should emphasize their need for a good labeling surface to prospective bottle suppliers and ask for samples. If you can’t lay a straight edge along the label panel without gaps underneath, you can expect labeling problems. No machine can overcome that. The solution here is with the bottle manufacturing. Label-friendly bottles are easy to make but are not the cheapest bottles you can buy.”

LabelPack works with label companies to jointly sell labelers to their customers. This is one way for a label company to bring additional value to their high-volume customers and not give them a reason to speak with their competition.

Label Mill

Label Mill, Savana, IL, USA, offers semi-automatic and fully automatic label applicators and printer applicators. “These solutions cover applications from primary product labeling to case level and pallet level labeling. Today about 40 percent of our machines are customized to meet a customer’s specific application or request,” says Rob Wienhoff, director.

Label Mill’s LM#1510 applicator
“All of our systems are truly modular. If you look at the industry, and almost all the brands offered in the market today, our competitors all carry a large number of models. Typically each model is unique to an application or methodology used to apply the media. Label Mill has designed its platform of labeling systems to meet all of today’s needs with only four models of labeling systems – two entry level and two high end platforms. Within each platform our systems are truly modular allowing us to meet almost any application within our standard machines.

Weinhoff says that these days he’s noticing more systems in contract packaging applications. “These applications are rapidly changing from day to day or run to run. A contract packaging facility never knows what items will be run next requiring them to be highly flexible. Label Mill excels in this environment due to our design approach and overall philosophy in achieving an application. This results in greater freedom for our customer.”

One of Label Mill’s top sellers is its LM#1510 model, one that Weinhoff says is one of the fastest applicators on the market. “The LM#1510’s high-speed servo motor drive outperforms stepper and clutch/brake applicators in speed, accuracy and dependability. With up to 1,500 linear inches per minute and depending on label and product size, approximately 250 labels per minute, the LM#1510 has features normally only found on high-end custom systems.”

Label Mill’s applicators are made in the US and Weinhoff says are built for quality like no other machines on the market. “You can look at a Label Mill applicator and see the solid, heavy-duty industrial design,” Wienhoff adds.


Shrink sleeves have been growing in popularity in recent years, as they offer brand owners a label with a 360 degree view of graphics and information. And these labels need applicators, too. However, due to the inherent nature of shrink labels, the application machinery is different from its conventional counterparts.

The SleevePro 600 from Karlville
Karlville Development Group, Miami, FL, USA, develops and manufactures both shrink sleeve converting as well as application equipment. For application, the company features its SleevePro 600. Maria Caparroso, sales representative, says that one of the machine’s advantages is its versatility, because the labels can be applied to different types and sizes of bottles by adjusting only the heat levels in the shrink tunnel. She points out that successfully applying these labels is a collaborative effort. “On the technical side, it is important to work closely with the machine manufacturer and the label provider and perform shrink tests before making a purchase decision. This is very important because applying the label is one thing, but getting a perfect shrink is another,” she says.

“Some of the most significant features of the SleevePro 600 are its six-blade rotary cut for quick and precise cutting, its start/stop technology, its bullet technology, and its servo driven cutting block and label shooting. It is possible to perform maintenance remotely via IP. It comes with enhanced fault detection and easy troubleshooting, as well as an enhanced motion control that decreases mechanical wear,” says Caparasso, who adds that the best thing about the machine is that the cost of spare parts is low compared to other machines in the industry.

The machine’s performance is 600 bottles per minute with a speed change integrated to full line. It operates quietly and with a changeover of less than 15 minutes.

The Sleeve Pro 600, offers complete integration with the filling line, minimizes operator intervention, and has a system to recall past work. The machine was developed with a high performance tension control system that allows up to 600 pieces applied per minute.

“When developing this specific machine, Karlville wanted to bring to the market a machine that was able to enter high end production lines,” she says.

Primera’s AP362 label applicator


Primera Technology, Plymouth, MN, USA, offers its AP-Series Label Applicators, semi-automatic labeling systems for cylindrical containers as well as many tapered containers, including bottles, cans, jars and tubes.

Two different models are available. The AP360 is the base model and applies single labels at a time. The AP362 is a more advanced model and can apply one or two different labels to a single container. A built-in LED counter and memory for up to nine front-to-back label offsets is also included.

With their compact size and easy operation, the applicators are ideal for any business looking to increase efficiency and create professional looking products. AP-Series Label Applicators are an ideal accessory to Primera’s LX- or CX-Series label printers. They can also apply roll-fed, PS labels produced by most other flexo, offset and digital presses.

“Our AP-Series Label Applicators are an ideal add-on sale for label converters,” says Mark D. Strobel, Primera’s vice president of sales and marketing. “Not only can you sell your customers their labels, but also the machines that will help to apply their labels faster and with greater accuracy.”
The AP360 is priced at $1,495 (MSRP) and the AP362 at $1,795 (MSRP) in the USA and Canada.


Label-Aire, Fullerton, CA, USA, features a wide range of application machinery. The equipment is available with a variety of labeling technologies, including air blow, tamp blow, wipe-on, dual action tamp, and corner wrap.

The company has recently introduced a new standard system, the Label-Aire Inline 5100, a stainless steel cabinet based system that can be outfitted with the full range of Label-Aire New Generation 3100/3000 Series applicators (wipe-on, air-blow, tamp-blow). The Inline 5100 also has a smooth-running Variable Frequency Drive (VFD) conveyor which improves label placement accuracy. For added convenience, the 5100 automatically spaces products and has a user-friendly operator interface. It is designed for reliable full and partial wrap labeling at medium to high speeds, high-volume, multi-shift operations.

Label-Aire’s new 3115-NV is designed for high speed wipe-on label application.
Also recently introduced is the Inline Series 6200, also a stainless steel cabinet based system. The PLC controlled 6200 is designed for heavy duty front/back-, side panel- or wrap labeling applications. Among its standard features are a rotating control panel, a 12-foot delrin chain conveyor with stainless steel side plates, and a segmented top trap hold down to keep the products in place. Other standard features include Automatic Speed Following for product surface profiling, VFD, and dual applicator mounts with in/out traverse, up/down, with tilt adjustments for maximum versatility. Standard speeds up to 2,000" per minute with VFD make the 6200 the ideal choice for demanding applications requiring speed and precision, Label-Aire says.

Among Label-Aire’s New Generation models is the 3115-NV, designed for high-speed wipe-on labeling applications at a standard dispense speed of up to 1,500" of web per minute or up to 2,000" per minute with optional powered rewind. Features include Velocity Compensation for improved label placement accuracy, a microprocessor controller with digital display, and ambidextrous parts. Zero Downtime Labeling allows for production to continue without interruptions. It’s Missing Label Compensation feature virtually eliminates unlabeled products. The 3115-NV comes standard with a heavy duty double stack stepper motor at no extra charge. The 3115-NV be easily converted to left- or right-hand use, and it can also apply labels to the top, side, or bottom of products with a label dispense accuracy of up to ±1⁄32". Adding to the 3115-NV’s versatility are the availability of tamp-blow and air-blow conversion kits.
blog comments powered by Disqus
  • Narrow Web Profile:

    Narrow Web Profile:

    Steve Katz, Editor||April 8, 2016
    Proprietary software and a mastery of e-commerce are the hallmarks of this New York-based label company.

  • Pharmaceutical Labels

    Pharmaceutical Labels

    Greg Hrinya, Associate Editor||April 8, 2016
    These specialty labels provide key information and adhere to the latest government regulations.

  • Flexo vs. Digital

    Flexo vs. Digital

    Steve Katz, Editor||April 8, 2016
    Which press will you buy?

  • Print Management Systems

    October 4, 2011
    Designed to enhance communication between converter and customer, print management systems have helped converters to streamline their processes, better manage their inventory and track their finances, among other features. What follows is a description of available print management products and the recent developments made by several companies in the industry.

  • Release Liner

    Release Liner

    July 12, 2011
    Demand for thin, film-based products is changing the face of the release liner market.

  • Converter eCommerce

    April 11, 2011
    What is Social Media and Why Should You Care?

  • Flexo Press Economics

    Flexo Press Economics

    April 11, 2011
    New press technology and Lean practices are cutting down time, labor and waste - and growing profits.

  • Static Control Equipment

    Static Control Equipment

    January 18, 2011
    Controlling static does not have to be a hair-raising experience.

  • Platemaking Equipment

    Platemaking Equipment

    May 7, 2010
    Digital platemaking systems share the field today with conventional equipment, but they are well liked and growing in popularity.

  • Flexo Plates

    Flexo Plates

    May 7, 2010
    With the increased demand for environmentally sustainable consumables, the all important flexo plate continues to evolve.

  • Anilox Rolls

    Anilox Rolls

    March 30, 2010
    Improvements in laser technology, coatings and finishing make today’s anilox rolls better equipped to deliver precise quantities of flexo ink to plates.

  • Doctor Blades

    Doctor Blades

    January 15, 2010
    A simple tool can make the difference between a good flexo print job and a great one.

  • Slitter Rewinders - AB Graphic International

    Slitter Rewinders - AB Graphic International

    October 7, 2009
    Machinery manufacturers have developed a wide range of equipment, with an assortment of standard features and options, to meet the needs of the label converting industry.

  • Web Inspection

    Web Inspection

    May 7, 2009
    The perfect printed image must pass ever more stringent quality standards, and the industry is meeting the challenge.

  • Flexo Trends

    Flexo Trends

    March 30, 2009
    Flexo, say the experts, no longer has to compare itself to offset. It now sets its own standards.

  • Rotary Dies

    Rotary Dies

    January 14, 2009
    Whether its solid or flexible, converters are benefitting from improved technology in their choice of cutting tool, with cost considerations in mind.

  • Release Liners

    Release Liners

    April 8, 2008
    The release liner industry enjoys steady growth, but must address rising

  • Static Control

    Static Control

    March 13, 2008
    A moving web will create static electricity under any conditions.

  • Print Management Systems

    Print Management Systems

    January 15, 2008
    Ever evolving to help printers and converters manage the intricacies of their operations, print management systems continue to improve business and production functions in new and useful ways. Some companies design their own systems, while others employ those designed for label converters. For this feature article we invited six developers of such systems to describe their products and what they offer to the printer.

  • Web Exclusive: India Label Summit

    Web Exclusive: India Label Summit

    April 26, 2007
    A fast growing label market in a strong domestic economy is pursuing avenues to ease participation in the global marketplace.

  • Release Liners

    Release Liners

    April 26, 2007
    These vital components of the pressure sensitive laminate are steadily evolving in a marketplace that is changing through competition.

  • Converters & RFID

    Converters & RFID

    February 27, 2007
    Major converters share their thoughts about RFID in their businesses and in the industry as a whole.

  • Rotary Dies

    Rotary Dies

    September 25, 2006
    Solid and flexible dies each have advantages in certain applications, though flexible dies are gaining ground on the traditionally more popular solid dies.

  • Rotary Screen

    Rotary Screen

    May 11, 2006
    Decoration, security, RFID, and now braille imaging are among the many capabilities of this versatile printing process.

  • Static Control

    Static Control

    November 28, 2005
    Small as they are, positive and negative ions can have a significant impact on the outcome of a print job as well as on the safety of workers.

  • Plate Mounters

    Plate Mounters

    October 18, 2005
    In search of the perfectly mounted printing plate, converters can choose from a variety of methods, all of which aim for accuracy and time saving.

  • Print Management Systems

    July 20, 2005
    Communication between converters and customers is a powerful technological achievement in software for converters.

  • Rotary Screen Printing

    July 19, 2005
    Converters and brokers reveal what they like, and don’t like, about each other.