01.26.22
Since setting up business in 2014, Siflex Packaging has focused on developing and improving processes related to the production of flexible packaging in Chile. To this end, it has 52 experienced employees working in a 5,000 square-meter facility located in the northern part of the capital, Santiago, and has invested heavily in machinery, processes and systems. One key piece of equipment is the Kodak Flexcel NX System, which was installed by Miraclon in 2018. Together with the Flexcel NX plates, Siflex has cut white ink consumption by up to 23%.
Luis Sirhan, founder and general manager of Siflex Packaging, explains that choosing the Flexcel NX System was the only option he considered, as he had already experienced its advantages first-hand when working for another company. “As I was already well aware of the strengths of Flexcel NX Technology, including the ink savings and increased productivity it enables, investing in it was a no-brainer.”
To confirm and further explore the benefits of this installation, Siflex Packaging decided to undertake a project where the objective was to measure the white ink savings that could be achieved with Flexcel NX plates. During this time, the company worked closely with Carlos Alejandro Moraga, printing applications specialist, flexo, at Miraclon, who audited the entire production process and advised Siflex Packaging on how to implement best practices while also helping it to optimize its production workflow to take full advantage of the Kodak Flexcel NX technology.
Sirhan explains, “We really appreciate how much Miraclon supported us on this project when they could have perfectly well walked away as the sale was already sealed and signed, but they accepted the challenge and it shows that they care about their customers. We have a very close relationship with them and will continue to work together on new projects and challenges.”
The company founder adds, “It has been a joint effort between Miraclon and our entire prepress and print team, who have been fully involved in recording data on all the jobs for months. In addition, we can also put this achievement down to the ongoing maintenance we always carry out on the machines and equipment, which also plays a role in achieving these savings and lowering ink consumption, which in turn allows us to cut our environmental emissions."
Raúl Azocar, head of production at Siflex Packaging, comments, “This study also demonstrated that we could achieve good white opacity with less ink. By using a Flexcel NX plate we have been able to save 23% white ink."
Cristian Mella, head of development at Siflex Packaging, points out, "The correct use of Digicap NX Patterning has also been fundamental in this saving, which we check when characterizing the press in relation to the plate, the aim being to achieve greater opacity while applying a smaller amount of ink. We adapt the Digicap NX Patterning to achieve higher ink densities on the press."
Siflex Packaging's production manager, Raúl Azocar, is also very satisfied with the performance of the plates because they maximize productivity on press, with fewer unscheduled press stops and less waste. "Flexcel NX Plates guarantee us excellent ink transfer, smooth solids and robust on-press performance. In addition, they allow us to accurately reproduce the sharpest image detail, offer high strength for high press speeds and greater durability for consistency throughout the press run and in replenishments."
Azocar says: “My experience with the Flexcel NX plates has been very good, and what is really extraordinary is the fact that there are no unscheduled stops on the press, and with a single adjustment this plate no longer needs to be adjusted or stopped for jobs sharing the same characteristics. We have been able to increase speeds without having to apply more pressure, and the plates withstand these runs and stay in the same condition, so we have been able to be more efficient. At Siflex we have no press stops caused by the plates, and this helps us to work without interruptions, to be able to repeat prints and to save on-press time and energy. We are convinced that we have the best print quality, and we don't have to replace plates due to dot loss, so all this underscores the quality and value of Flexcel NX plates.”
Sirhan adds, “Since we have been working with the Flexcel NX System, we have been producing a higher print resolution than we did before. Added to this benefit is the peace of mind of having in-house plate production, which allows us to respond to any demand from our customers and to adjust job times as we need to.”
Luis Sirhan, founder and general manager of Siflex Packaging, explains that choosing the Flexcel NX System was the only option he considered, as he had already experienced its advantages first-hand when working for another company. “As I was already well aware of the strengths of Flexcel NX Technology, including the ink savings and increased productivity it enables, investing in it was a no-brainer.”
To confirm and further explore the benefits of this installation, Siflex Packaging decided to undertake a project where the objective was to measure the white ink savings that could be achieved with Flexcel NX plates. During this time, the company worked closely with Carlos Alejandro Moraga, printing applications specialist, flexo, at Miraclon, who audited the entire production process and advised Siflex Packaging on how to implement best practices while also helping it to optimize its production workflow to take full advantage of the Kodak Flexcel NX technology.
Sirhan explains, “We really appreciate how much Miraclon supported us on this project when they could have perfectly well walked away as the sale was already sealed and signed, but they accepted the challenge and it shows that they care about their customers. We have a very close relationship with them and will continue to work together on new projects and challenges.”
The company founder adds, “It has been a joint effort between Miraclon and our entire prepress and print team, who have been fully involved in recording data on all the jobs for months. In addition, we can also put this achievement down to the ongoing maintenance we always carry out on the machines and equipment, which also plays a role in achieving these savings and lowering ink consumption, which in turn allows us to cut our environmental emissions."
Raúl Azocar, head of production at Siflex Packaging, comments, “This study also demonstrated that we could achieve good white opacity with less ink. By using a Flexcel NX plate we have been able to save 23% white ink."
Cristian Mella, head of development at Siflex Packaging, points out, "The correct use of Digicap NX Patterning has also been fundamental in this saving, which we check when characterizing the press in relation to the plate, the aim being to achieve greater opacity while applying a smaller amount of ink. We adapt the Digicap NX Patterning to achieve higher ink densities on the press."
Siflex Packaging's production manager, Raúl Azocar, is also very satisfied with the performance of the plates because they maximize productivity on press, with fewer unscheduled press stops and less waste. "Flexcel NX Plates guarantee us excellent ink transfer, smooth solids and robust on-press performance. In addition, they allow us to accurately reproduce the sharpest image detail, offer high strength for high press speeds and greater durability for consistency throughout the press run and in replenishments."
Azocar says: “My experience with the Flexcel NX plates has been very good, and what is really extraordinary is the fact that there are no unscheduled stops on the press, and with a single adjustment this plate no longer needs to be adjusted or stopped for jobs sharing the same characteristics. We have been able to increase speeds without having to apply more pressure, and the plates withstand these runs and stay in the same condition, so we have been able to be more efficient. At Siflex we have no press stops caused by the plates, and this helps us to work without interruptions, to be able to repeat prints and to save on-press time and energy. We are convinced that we have the best print quality, and we don't have to replace plates due to dot loss, so all this underscores the quality and value of Flexcel NX plates.”
Sirhan adds, “Since we have been working with the Flexcel NX System, we have been producing a higher print resolution than we did before. Added to this benefit is the peace of mind of having in-house plate production, which allows us to respond to any demand from our customers and to adjust job times as we need to.”